I found an amazing plant shelf on Craigslist last year and it’s the perfect addition to our small back patio. However, take a lesson from me. If it’s going outdoors in the blazing sun and the elements, do not paint it with interior paint – no matter how many coats of polyurethane you add – It will not last. And then you will have a messy, peeling, unprotected shelf on your hands. Check out the before and after on this one!
Here’s a pic of my fab find last year after a few coats of paint and pretty much a quart of polyurethane.
And here ladies and gents is what you end up with after it gets painted with interior paint:
I mean, who wouldn’t want that train wreck sitting on their patio, right??? Gross. Clearly this guy needed a complete overhaul. Painting over it wasn’t going to do the trick without getting all the peeling paint off first.
This post contains affiliate links – see my disclosure policy here.
Citristrip to the rescue. If you’ve never used this stuff before, I highly recommend it. I’ve used it several times and it works like a champ. It’s safe for indoor use although I wouldn’t advise that because of the mess that happens when you start chipping away all the peeling paint. Another plus is it doesn’t have an awful chemical smell like other harsh strippers (smells like oranges).
Get to Stripping!
Put plastic underneath your project because it’s about to get messy. Get a paint pail of some kind and liners – This one is my favorite. Make sure to get the liners too so you can just discard that part and your paint pail will be good for years of use. I use a cheapo brush because I don’t want paint stripper residue on my good ones. Also worth noting – if you’re doing a small project, you can’t use foam brushes. The stripper will eat away your foam. Not that I tried that once or anything. Or maybe I did. Oops. Anyway – Citristrip is a thin gel consistency and goes on like paint. Paint a good coat all over your furniture piece and wait. And wait. And wait some more. I gave this plant shelf at least three hours before I started chipping away, but it could’ve used longer. Here’s what it looks like in action:
You’re going to need some plastic putty knives like these. I wouldn’t use metal because you don’t want to gouge your wood. You can test a small area to see if the paint is ready to come off.
One word of advice – if you want every single drop of paint to come off, leave the stripper on longer. Or you can apply a second coat of stripper. For this plant shelf, I wasn’t concerned with every bit of it being stripped. This is an outdoor piece that is bound to get some dings and dirt on it. I just needed a semi smooth surface to repaint. I scraped away at it for a while. When I had most of the peeling paint off, I let it sit for a day to make sure everything was dry. Then I used the electric sander and went over all the areas I could. If you don’t have an electric sander, do yourself a favor and get one ASAP. It’s a total game changer when it comes to refinishing furniture. Here’s a similar one to the one I use. I chipped away a little more after sanding and that was it. I found it helpful to work on this in stages – if not, your shoulders and forearms will hate you for all the scraping and sanding! It definitely wasn’t perfect after the stripping and sanding, but for an outdoor piece, it was just fine.
For this project I used off the shelf Olympic Exterior paint in satin finish from Lowes. One of my favorite blues is Lyndhurst Duchess Blue – sounds fancy, huh? It’s the same color I used in the plant shelf interior paint mishap of 2016. Teal/turquoise ish. Not a word, I know, but it works. I don’t know why, but I’ve painted a ton of things over the years, and blue is by far my favorite. Doesn’t matter what it’s going on or what brand, but blue paint goes on like butter. If anyone knows the why of this, please share with me!
I did two coats on this plant shelf including underneath each shelf. I waited four hours between coats for adequate drying time. And I even had a little helper for this one! Don’t mind the colorful hair – it was wacky hair day at school this day.
Wait for it to dry completely – we actually brought it inside at night because the sprinklers were running that night and the recommendation on the paint can said not to paint in the evenings when it may be dewy. Dried overnight and then back outside.
Add the fun stuff!
Now, you can add some pretties and done! I added some DIY planters – you can see my farmhouse style planter I made here. Most everything on the shelf is thrifted or repurposed. There’s a brick from my husband’s grandpa’s chimney that sits front and center and an old railroad spike. A rusty watering can even became a planter and I plan to add a few things here and there to add to the rustic charm. The hanging planters on the side are clearance finds from last year at Michaels and my ferns are coming back?? Didn’t know they would do this!
Let’s just hope I can keep the plants alive!
I’d say that’s a huge improvement from the peeling gross mess I started with!
Total Cost Breakdown
- Plant shelf – Already had, but I paid $50 on Craigslist last year. If you’re handy, you can build a basic shelf like this for around $75 bucks.
- Citristrip – $12
- Putty Knives – $5
- Paint pail and liners – I already had these but about $15 will get you started
- Paint – $11
- Plastic Drop Cloths – Already had on hand, but you can use trash bags if you need to!
- Plants/containers – this will vary depending on what you have on hand. I spent about $10 on plants/soil.
Definitely not a cost free update, but hopefully it will last longer than 6 months like the last time!