We bought our house in 2013. Everything was pretty much picked out but we got to choose a few things. We were able to pick the color of the backsplash and the counter tops. Here’s a before shot from before we moved in:
It’s good. The cabinets are beautiful and so is the granite. But I never liked the backsplash. It just didn’t go. Fast forward almost four years. I did a lot of Pinterest and google searching and came to the conclusion that I could change them. We don’t have the budget right now to rip it out and add the dreamy subway tile that I want, so the next best thing (and easier on my wallet) is painting.
This post contains affiliate links (see my full disclosure here)
- TSP for cleaning
- Kilz Oil Based Primer
- Oil Based Enamel Paint
- Old Rags
- Mop Bucket
- Newspaper or Trashbags (for covering the counters)
- Paint Brushes specifically for oil based paints
- Small Paint Rollers (I used 4 inch foam rollers)
- Painter’s Tape
First, remove all the outlet covers and store them safely so you can find them.
Then, you need to clean, clean, clean. I used TSP powder that you mix with water. Wear gloves and follow the directions on the box. I used our mop bucket to mix and old rags to clean. Clean the surfaces like your life depends on it because you want the paint to adhere. Especially behind cooktops (grease tends to collect here and paint does not adhere to grease). I went over the area behind our cooktop two times. Let it dry completely. After you clean, tape off all the areas you don’t want paint on. Lay newspaper or trash bags on the rest of the counters to avoid splatter. Trust me on this. I didn’t lay newspaper at first and now I have little paint flecks on the backsides of my cooktop.
I would not recommend painting ceramic tile without priming first. I read a bajillion (not a word) tutorials, and nearly every single one says to prime. Kilz oil based primer is my standard go to. Make sure the kids are at school and you can open a few windows/doors. Luckily we had one of those Georgia January days when it’s 70 degrees, so I lucked out. It’s still pretty rough though. Oil based paint is smelly stuff. Let the primer dry completely before moving on. It takes several hours.
I bought oil based paint in Panda White from Sherwin Williams (I chose this color because all of our trim is already this color). The problem is, I tend to stick with their Pro Classic paint, but I only needed a quart. The Pro Classic only comes in high gloss in a quart. Didn’t want high gloss. So the next best thing was this:
I followed the directions on the can and didn’t let my impatience get the best of me. It’s tricky to paint with oil based gloss. It takes forever to dry and you don’t have a lot of leeway. You can’t go over the same area more than a few times.
I taped off all the areas that didn’t need paint, worked in sections and brushed the top and bottom with paint and used a small roller for the rest. Work in sections because once it gets tacky, you don’t want to touch your brush or roller to that area again. If you have a large area I wouldn’t cut in all the tops/bottoms with a brush and then roll.
Then I waited a full day to do the second coat. Do the same process of working in sections by cutting in and then rolling. There are a few places that aren’t perfect, but probably I’m the only one that notices.
However, it’s a huge change for very little money. I already had the primer on hand, and spent $18 on the paint during the 30% off sale at Sherwin Williams.
Just jump in and do it if you’re considering it. Sometimes our budget doesn’t allow for major changes and that’s ok. It took me a full five minutes to actually put the paintbrush to the tile, but once I started, I knew it would be fine. It makes a dramatic difference in the look of our kitchen!
Get ready cabinets, you’re next.